Smart Base - Base 10ml (TPO-free)

Even better than ever - the new OSIX SMART BASE.
Very easy to apply and self-leveling base. Contains no TPO or HEMA ingredients.

The updated hypoallergenic composition will allow for safer work for both the master and the client. A clear base coat designed for use before gel polish or extensions. Even stronger and harder than before.

This is the perfect base for achieving maximum wear time. OSIX Smart Base adheres perfectly to all types of nail plates.

• Does not contain TPO and HEMA
• Transparent colors
• Perfect as a base coat before extensions or varnishing
• Suitable for problematic nail plates
• Easily distributed
• Does not pull in the lamp
• Self-leveling
• Easily filed
• Perfectly strengthens the natural nail
• Easy to shape uneven nails

1. Prepare the nail form
2. Get a manicure,
3. Roughen the plate with a fine file or buff.
4. Wipe your nails with a tissue moistened with OSIX Nail Prep dehydrator. This will prevent the polish from peeling and creating air gaps.
5. Depending on the type of nail plate and nail length, model with Hard base.
For short nails, use a slightly thicker base coat in the middle of the nail (about 1mm thick at the apex)
For medium length nails, use a slightly thicker base coat in the apex area (the apex area depends on the natural nail type and shape) (approx. 1.2mm-1.5mm thickness)
For long nails, use a thicker base coat in the apex area (about 1.5-2mm thick)

ATTENTION! If the nail plate is wet, thin or you are using a larger amount of base: reduce the CCFL/LED lamp to 24W and when you feel the heat, briefly remove the nails from the lamp. The strongest heat is felt after 5 seconds of polymerization in the lamp.

Recommendation for thin nails: Apply the first base coat in a thin layer, dry in the lamp for 30 seconds. With another layer you can already model the apex zone (you can see the recommendations for applying the base above).
6. Apply colored OSIX gel polish or French base.